| 01/16/02 |
skanlan |
2.0.2.18 |
ALL |
This fixes a problem with skanlan constantly scanning the hard drive looking for authorization on a few computers. |
1 |
| 02/20/02 |
Skanlan |
2.0.2.19 |
ALL |
Internal Test Version |
2 |
| 02/21/02 |
Skanlan |
2.0.2.20 |
UP3300 |
updates a problem with the get all job not working on the UP3300. |
3 |
| 03/06/02 |
Skanlan |
2.0.2.21 |
UP600 |
Internal Test Version - this version is the first attempt to fix time timeout problem with TCP/IP on the UP600 during the resetting of the registers |
4 |
| 03/08/02 |
Skanlan |
2.0.2.22 |
UP600 |
Internal Test Version This partially corrects the timeout problem with the 05-00 errors on the UP600 with TCP/IP during a wait command |
5 |
| 03/08/02 |
Skanlan |
2.0.2.23 |
UP600 |
Internal Test Version This partially corrects the timeout problem with the 05-00 errors on the UP600 with TCP/IP during a wait command |
6 |
| 03/08/02 |
Skanlan |
2.0.2.24 |
ALL |
Internal Test Version |
7 |
| 03/20/02 |
Skanlan |
2.0.2.25 |
UP600 |
Correct the timeout issues on both the RS and TCP/IP when dealing with the wait commands during the end of day jobs |
8 |
| 03/20/02 |
Skanlan |
2.0.2.26 |
UP3300 |
Beta test to add the capability of manual credit card number entry on the UP3300 using the MWS CAT |
9 |
| 03/20/02 |
Skanlan |
2.0.2.27 |
UP3300 |
This finishes adding the capability of manual credit card number entry on the UP3300 using the MWS |
10 |
| 03/20/02 |
Skanlan |
2.0.2.28 |
ALL |
Internal Test Version |
11 |
| 05/09/02 |
Skanlan |
2.0.2.29 |
ALL |
Internal Test Version |
12 |
| 05/14/02 |
Skanlan |
2.0.2.30 |
ALL |
This fixes a problem for the Judge Data (20-02) commands timing out on the end of day under Windows 2000 |
13 |
| 06/06/02 |
Skanlan |
2.0.2.31 |
A470 |
This corrects a wait command taking too long to respond on the A470. It didn't cause the comm to fail, but causes long pauses between communications events |
14 |
| 06/06/02 |
Skanlan |
2.1.0.0 |
ALL |
No change from 2.0.2.31. It only renumbers it to match the OCX version number for compatibility. |
15 |
| 01/07/02 |
SKAN_Talk.OCX |
4.0.2.29 |
A770, UP3300 |
Adds the Employee Clock for the A770 and UP3300 |
16 |
| 01/30/02 |
SKAN_Talk.OCX |
4.0.2.30 |
ALL |
Internal Test Version Adds the Function Preset data conversion support (adds end segments in the database) |
17 |
| 05/07/02 |
SKAN_Talk.OCX |
4.0.2.39 |
ALL |
Fixes the output of the RAM tables, specifically on the Direct key just repeating the first key value over and over |
18 |
| 05/07/02 |
SKAN_Talk.OCX |
4.0.2.40 |
A750E |
Adds the Employee Clock data conversion and report for the A750E |
19 |
| 05/15/02 |
SKAN_Talk.OCX |
4.0.2.41 |
UP600 |
Adds the Customer Sales data conversion |
20 |
| 05/20/02 |
SKAN_Talk.OCX |
4.0.2.42 |
UP600 |
Internal Test Version for the Customer Sales and Capture Sales Data conversion |
21 |
| 05/21/02 |
SKAN_Talk.OCX |
4.0.2.43 |
UP600 |
Finishes changes to the Customer Sales and Capture Sales Data conversion |
22 |
| 06/03/02 |
SKAN_Talk.OCX |
4.0.2.44 |
ALL |
Corrects OCX crash if the EXPORT directory doesn't exist. It also corrects a problem with some RAM tables exporting 4 bytes too long. Also recognizes the FP data conversion type as a RAM table and doesn't prompt for an entry in QSysHeaders when exporting the file. |
23 |
| 06/06/02 |
SKAN_Talk.OCX |
4.1.0.0 |
ALL |
Adds the skanlan version number to the end of the log. |
24 |
| 06/13/02 |
SKAN_Talk.OCX |
4.1.0.1 |
A570 |
Internal test version that adds the If-Standalone command when running jobs |
25 |
| 06/14/02 |
SKAN_Talk.OCX |
4.1.0.2 |
A570 |
Finishes support for the If-Standalone command when running communications jobs |
26 |
| 06/20/02 |
SKAN_Talk.OCX |
4.1.0.3 |
ALL |
Internal text version testing new job substitution parameters. |
27 |
| 06/21/02 |
SKAN_Talk.OCX |
4.1.0.4 |
ALL |
Adds %p %P %q %Q substitution parameters for naming files by date rather than by store and terminal. |
28 |
| 05/07/02 |
SKAN_Talk.OCX |
4.0.2.31 - 4.0.2.38 |
ALL |
Internal Test versions for working out the details for the Function preset data conversion and exporting of RAM tables with new data conversion type |
29 |
| 06/21/02 |
Manager.exe |
1.01.0665 |
A570 |
Fixes the PLU Group editor and selector in the PLU editor |
30 |
| 06/21/02 |
Manager.exe |
1.01.0665 |
A570 |
Finishes the Server Editor for the A570 |
31 |
| 06/21/02 |
Manager.exe |
1.01.0665 |
A570 |
Fixes the Department Group editor and selector in the PLU editor |
32 |
| 06/21/02 |
Manager.exe |
1.01.0665 |
ALL |
Allows the HALO and LALO for have a 0 in the first field on the Department and Function Preset editor |
33 |
| 06/20/02 |
database |
N/A |
A570 |
Adds the Validation Text and Slip Printer Text, GLU Table data conversion on the A570 |
34 |
| 06/20/02 |
database |
N/A |
A750E, A770, UP3300 |
Corrected a problem in the Employee timekeeping report that occurred when an employee logged on multiple times in a single day |
35 |
| 06/21/02 |
database |
N/A |
ALL |
Changed the FunctionPreset Table so that all the yes/no fields are now number fields |
36 |
| 06/21/02 |
database |
N/A |
ALL |
Changed all the send-function-preset jobs so that a replace (10-01) command is issued instead of an update (10-00) command |
37 |
| 06/21/02 |
database |
N/A |
ALL |
Updated QsysJobProtos so that it only exports Updates for File Tables and Export Tables for RAM tables. This should make the transmit changes jobs more efficient and faster |
38 |
| 06/21/02 |
database |
N/A |
A570 |
Changes the A570 jobs so that the naming convention is %S%R instead of %S00 since we now support polling by individual terminal |
39 |
| 06/21/02 |
database |
N/A |
A570 |
Fixed the data conversion on the A570 for the UPC text |
40 |
| 06/23/02 |
database |
N/A |
A570 |
Fixed the data conversion on the A570 for the Stacked report and Preset1 |
41 |
| 06/23/02 |
database |
N/A |
A570 |
Did some more cleaning up on some of the A570 jobs |
42 |
| 06/23/02 |
database |
N/A |
A570 |
added Data conversion for UPC X/Z Pickup, UPC PGM Pickup, GLUFileClosed, GLUFile |
43 |
| 06/24/02 |
Manager.exe |
1.01.0666 |
A570 |
Fixes the server Group editor, Link and Set PLU selector in the PLU editor |
44 |
| 06/26/02 |
database |
N/A |
UP600 |
Corrected an error on the Item By Department report |
45 |
| 06/26/02 |
Manager.exe |
1.01.0669 |
A570 |
Adds more of the A570 options to the UPC editor, allows for Department link 0 on PLUs, corrects the HALO/LALO editor not displaying the first digit if it is 0 |
46 |
| 06/27/02 |
Manager.exe |
1.01.0670 |
A570 |
Adds more of the A570 options to the UPC editor, adds all appropriate fields to the database when adding a new PLU or UPC |
47 |
| 06/27/02 |
database |
N/A |
A570 |
Adds support for Link and Set PLU tables greater than 9999, cleans up the polling procedure for multidrop polling |
48 |
| 06/27/02 |
Manager.exe |
1.01.0672 |
ALL |
Corrects an error when editing a link PLU table from the PLU editor |
49 |
| 06/27/02 |
Manager.exe |
1.01.0672 |
ALL |
When modified, the program sets the update flag in the database for the PLU group Text, Server Group and PLU Hourly Group so that the updates can be sent to the register with the eod polling |
50 |
| 07/01/02 |
Manager.exe |
1.01.0675 |
ALL |
Adjusts the frame on the Function Preset editor so that it fits in at 800x600 screen resolution |
51 |
| 07/01/02 |
Help File |
N/A |
ALL |
Added the updated help file into the distribution install |
52 |
| 07/01/02 |
Manager.exe |
1.01.0680 |
ALL |
Corrects Function Preset for the Sign +/- always reading +, and corrects the reversed logic on the Allow Entry in Reg mode field |
53 |
| 07/01/02 |
Manager.exe |
1.01.0680 |
UP600 |
Allows 16 characters in the PLU menu title field instead of 8 |
54 |
| 07/01/02 |
Manager.exe |
1.01.0680 |
ALL |
Fixes the QsysJobProtos building the same updates across several stores, instead of just for the selected store |
55 |
| 07/01/02 |
Manager.exe |
1.01.0680 |
ALL |
Changes the Tlog trace log file from the manager directory to the log directory |
56 |
| 07/03/02 |
Manager.exe |
1.01.0682 |
ALL |
Corrects a problem adding a new store after a 570 store has been created |
57 |
| 07/03/02 |
database |
N/A |
A750E, A770, UP3300 |
Corrects a problem with the employee timekeeping report parameter repeating the employees name/number for every run number in the history table |
58 |
| 07/10/02 |
Manager.exe |
1.01.0684 |
ALL |
Allows for the Tlog Sort-N-Report with an unprotected version of skanlan, also corrects an error with the push.bat when called in the poll list |
59 |
| 07/10/02 |
Manager.exe |
1.01.0686 |
ALL |
If skanlan doesn't load as a system service on XP, it loads it manually it from the \system32 directory when the software is launched |
60 |
| 07/11/02 |
Manager.exe |
1.01.0687 |
ALL |
Fixes a problem when running the TLOG report. It was trying to output the log a directory that didn't exist |
61 |
| 07/10/02 |
Skanlan |
2.1.1.0 |
ALL |
Under RS, fixes the WAIT was not checking the returned status code from the register and fixes When the WAIT returned a non-zero status, it is now being passes through to SKAN_Talk to detect the error |
62 |
| 07/10/02 |
SKAN_Talk.OCX |
4.1.1.0 |
ALL |
Under RS, fixes the WAIT was not checking the returned status code from the register and fixes When the WAIT returned a non-zero status, it is now being passes through to SKAN_Talk to detect the error |
63 |
| 07/11/02 |
Documentation |
N/A |
ALL |
distribution install now includes registration and communications setup documentation for all models |
64 |
| 07/16/02 |
database |
N/A |
ALL |
Changes the data conversion for the GLU file and Drive Thru file and creates a report to check the status for open GLUs and Drive Thru's checks |
65 |
| 07/10/02 |
Skanlan |
2.1.1.1 |
UP3300 |
Blocks out all but the last 4 digits of the credit card number on the receipt for the centralized credit card processing |
66 |
| 07/18/02 |
database |
N/A |
A570 |
Corrects a data conversion problem on the export of the Direct Key file. |
67 |
| 07/19/02 |
database |
N/A |
A750E, A770, UP3300, UP600 |
Adds into the eod-get-consolidated/individual jobs commands that can be substituted in case of timing problems during communications. The commands remove the judge data filter. |
68 |
| 07/19/02 |
Manager.exe |
1.01.0690 |
ALL |
Removes the edit keyboard function being allowed from the drop down menu in admin mode unless the package is authorized for Virtual Keyboard |
69 |
| 07/19/02 |
Manager.exe |
1.01.0690 |
ALL |
When initializing a store, it copies the files allocation file for as many terminals as are defined. This was previously only done if the store was polled by terminal instead of consolidated. |
70 |
| 07/19/02 |
database |
N/A |
UP600 |
Adds the data conversion for the Graphic header and Graphic footer |
71 |
| 07/22/02 |
Manager.exe |
1.01.0692 |
ALL |
In the Store Setup screen, stores and terminals that are not set as active will have the message " - INACTIVE!!!" to the right of the store name |
72 |
| 07/25/02 |
SKAN_Talk.OCX |
4.1.2.0 |
ALL |
Internal Test Version - Adds a new property so that the skanlan version number and skan_talk.ocx version number can be detected from the Help and About screen |
73 |
| 07/25/02 |
Skanlan |
2.1.2.0 |
ALL |
Internal Test Version - Adds a new property so that the skanlan version number can be detected from the Help and About screen |
74 |
| 07/25/02 |
SkanInstall |
1.0.0.0 |
ALL |
This is a new utility that allows the registration and authorization to be taken from an old version of skanlan and copied into a new version during the update procedure rather than having to make and email a custom version for every update |
75 |
| 07/25/02 |
RegisterSKAN |
1.0.2.6 |
ALL |
Adds a remove registration button to re-license the software for those users that had a demo version and are upgrading to a full version |
76 |
| 07/25/02 |
DaoCopy |
1.0.0.5 |
ALL |
This version prompts to press the Enter button after the data transfer is complete. Any errors that occur will be kept onscreen until Enter is pressed |
77 |
| 07/29/02 |
database |
N/A |
A750E, A770, UP3300 |
The employee clock report was changed to allow an employee that did not have a name associated with it in the Employee Preset Editor to appear in the report |
78 |
| 07/30/02 |
database |
N/A |
A770 |
Corrected a problem on the virtual keyboard when the Message 1-9, Message Menu or Edit Tip keys were present on the keyboard, the virtual keyboard would return an error for an invalid key being present |
79 |
| 07/30/02 |
Manager.exe |
1.01.0695 |
ALL |
When an invalid key is detected on the keyboard, rather than return a message that there is an invalid key and abort entry into the editor, it inhibits the key on the keyboard and then enters the virtual keyboard |
80 |
| 07/30/02 |
Manager.exe |
1.01.0695 |
ALL |
In the Help and about screen, the skanlan.exe and the SKAN_Talk.ocx versions are now displayed |
81 |
| 07/31/02 |
database |
N/A |
ALL |
Added ASCII export capability for the Server report and added a variation of the current ASCII export for the Terminal report |
82 |
| 07/31/02 |
database |
N/A |
ALL |
Added a query so that when the Virtual Keyboard is built, the text for many of the Function keys are displayed as they appear in the Function Text file rather than using the SKAN_Talk default names for the keys. The text for the function text on the keyboard can be changed to affect only the printed keyboard or to write the change back to function text table so it will display it this way on the reports. |
83 |
| 07/31/02 |
Manager.exe |
1.01.0696 |
ALL |
When the text for a function key is changed in the virtual keyboard, the name is written back to the Function Text file so it will change the name that appears in the SKAN_Talk and the register reports |
84 |
| 08/02/02 |
database |
N/A |
ALL |
Modified the PLU ASCII export report so that when the system is polled as a multi-drop, one file is exported with all the register data rather than a file for each register polled |
85 |
| 08/02/02 |
database |
N/A |
A450, A470 |
Created an ASCII export file for the Cashier Sales report |
86 |
| 08/05/02 |
SKAN_Talk.OCX |
4.1.2.1 |
ALL |
Adds the capability to copy, install and verify the SKAN_Talk.ocx with the SKANinstall utility |
87 |
| 08/05/02 |
database |
N/A |
A770, UP3300, UP600 |
On the virtual keyboard, it fixes the Next $ key from being displayed and printed as Next $ ¦4900 |
88 |
| 08/07/02 |
RegisterSKAN |
1.0.0.7 |
ALL |
If the registration is not complete, upon exit the site key files are deleted so that a new site code will be generated |
90 |
| 08/07/02 |
Manager.exe |
1.01.0696 |
ALL |
In the virtual keyboard, an Apply button was added so that the present changes can be saved without having to exit and reload the keyboard editor. |
91 |
| 08/08/02 |
Skanlan |
2.1.2.2 |
ALL |
Changes the error level when there is a problem reading from the serial port from a warning to an error. |
92 |
| 08/14/02 |
database |
N/A |
ALL |
Changed the CAT Preset table to allow for fields that are zero length. |
93 |
| 08/07/02 |
Manager.exe |
1.01.0706 |
ALL |
Changes the way that the Transmit-Changes job gets build when there are multiple stores that are of different model cash registers. Under some circumstances, a change in one store would get propagated into a different store that was a different model register. |
94 |
| 08/14/02 |
Manager.exe |
1.01.0709 |
ALL |
During the registration process, it now checks for the authorization file first then the skanlan.ini file. This corrects an error that can occur when running an update for the software |
95 |
| 08/14/02 |
Manager.exe |
1.01.0709 |
ALL |
During the registration process, if the authorization is not present, a message box appears that instructs the user to re-launch the program to after the registration is complete. |
96 |
| 08/16/02 |
database |
N/A |
ALL |
For the end of day polling, the commands that tell the register to only send back data that is not zero were removed due to some Win2000 and XP computers having time-out errors during communications |
97 |
| 08/17/02 |
database |
N/A |
A570, A750E, A770, UP3300, UP600 |
Corrected a problem on the Server report where is the server numbers were not in consecutive order, it would not show some of the servers on the report |
98 |
| 08/17/02 |
database |
N/A |
UP600 |
Corrected a problem on the Server report where is the Past Void and Transaction Count were not showing up in the Terminal and Server reports |
99 |
| 08/20/02 |
Manager.exe |
1.01.0712 |
ALL |
When a server is added or deleted, the Block number which is used to correlate the server sales to the server preset file is synchronized after a successful polling |
100 |
| 08/20/02 |
database |
N/A |
A570 |
Corrected a data conversion problem on the Server Preset file so that the file is sent back to the register properly |
101 |
| 08/21/02 |
Manager.exe |
1.01.0714 |
ALL |
On entering the reports menu, SKAN_Talk checks to see which models are authorized and only displays the reports that are appropriate for the authorized model ECRs |
102 |
| 08/21/02 |
database |
N/A |
A570 |
When running the UPC reports, the Check Digit that the register uses to determine what type of UPC the item is is no longer displayed. |
103 |
| 08/21/02 |
database |
N/A |
A570 |
Adds a very simplistic UPC stock and reorder report |
104 |
| 08/27/02 |
Manager.exe |
1.01.0717 |
ALL |
Corrects a problem introduced in build 1.01.0714 where an error is given when saving custom reports or saving reports to the report queue |
105 |
| 08/27/02 |
SkanInstall |
1.0.1.0 |
ALL |
Adds the capability to register the SKAN_Talk.ocx from version 4.1.2.0 and up |
106 |
| 08/27/02 |
SKAN_Talk.OCX |
4.1.2.2 |
UP600 |
Adds support for capturing the interactive TLOG via TCP/IP. Adds two elements to the SRN Pending event - store number and TCP/IP address of the register sending the event. Also provides the machine number from the TCP/IP packet which could be different than the register number |
107 |
| 08/27/02 |
Skanlan |
2.1.2.3 |
UP600 |
Internal Test Version - Adds support for capturing the interactive TLOG via TCP/IP |
108 |
| 08/08/02 |
SkanInstall |
1.0.1.1 |
ALL |
Reads the SKANLan.ini file (if available) to get the current port assigned to SKANLan, thus shutting down the correct SKANLan port, if that port is not 5000. |
109 |
| 08/27/02 |
Manager.exe |
1.01.0717 |
A570, A750E, A770, UP3300, UP600 |
Corrects a problem when running the Check open GLU / Drive Thru status report where is says the report name is invalid after having run any report in the periodic reports section |
110 |
| 08/28/02 |
database |
N/A |
ALL |
Deleted a few entries from the send-all job |
111 |
| 08/28/02 |
Manager.exe |
1.01.0719 |
ALL |
Internal Test Version - Corrects an internal ordering issue for the automatic building of the end of day polling jobs when there are multiple stores with high numbered stores |
112 |
| 08/27/02 |
Skanlan |
2.1.2.4 |
UP600 |
Corrects a problem introduced in 2.1.2.3 that causes skanlan to use a high percentage of the CPU resources when it is scanning for the TLOG polling requests issued from the cash registers |
113 |
| 08/29/02 |
database |
N/A |
A750E, A770, UP3300, UP600 |
Adds a separate Automatic Purge function for the TLOG sales history so that it can be purged more often since it takes more space in the database |
114 |
| 08/29/02 |
database |
N/A |
A750E, A770, UP3300, UP600 |
Removed support for polling jobs that use the Sharp 01-INPC SRN communications board |
115 |
| 08/29/02 |
Manager.exe |
1.01.0721 |
A750E, A770, UP3300, UP600 |
Matching change for the database to add a separate Automatic Purge function for the TLOG sales history so that it can be purged more often since it takes more space in the database |
116 |
| 09/05/02 |
Skanlan |
2.1.2.5 |
ALL |
Adds 1 second to a timing constant for the end of day polling jobs due to communications timeouts on some computers running Windows 2000 and XP |
117 |
| 09/25/02 |
database |
N/A |
A450 |
Adds the Function Preset to the initialization |
118 |
| 09/27/02 |
Manager.exe |
1.01.0722 |
ALL |
Speeds up entry into the period reports screen on databases that have a large amount of data stored in the sales history tables |
119 |
| 09/27/02 |
database |
N/A |
UP600 |
Created the send jobs for the Graphic Logo files |
120 |
| 09/30/02 |
SKAN_Talk.OCX |
4.1.2.3 |
ALL |
Corrects a problem with the output of some files being 1 byte too long which causes the register to reject the file. (This was only observed to be a problem on the A450T with the Function Text file ) |
121 |
| 10/03/02 |
database |
N/A |
ALL |
Added two jobs that allows for the saving of customized polling jobs and importation of previously saved custom jobs |
122 |
| 10/10/02 |
Manager.exe |
1.01.0724 |
ALL |
Changes the maximum terminal number allowed from 99 to 254 |
123 |
| 10/10/02 |
Skanlan |
2.1.2.7 |
ALL |
Changes the command that is used to ask for the success/failure status of Remote Job Entry (RJE) commands on the UP600/UP700 to collect additional errors not reported using the previous status command |
124 |
| 10/10/02 |
SKAN_Talk.OCX |
4.1.2.4 |
ALL |
Adds the capability in the jobs editor to specify what commands are issued to the register based on whether TCP/IP communications or RS communications has been selected by using the if IS-TCP or if IS-RS commands |
125 |
| 10/11/02 |
database |
N/A |
UP600 |
Corrects the commands used for polling when using the polling by terminal option on the UP600 |
126 |
| 10/15/02 |
Skanlan |
2.1.2.8 |
A420 |
Adds support for the Sharp A410/420 |
127 |
| 10/15/02 |
Manager.exe |
1.01.0727 |
A420 |
Adds support for the Sharp A410/420 |
129 |
| 10/15/02 |
database |
N/A |
A420 |
Adds support for the Sharp A410/420 |
130 |
| 10/20/02 |
Manager.exe |
1.01.0735 |
A420 |
Adds additional support for the Link PLU and Set PLU editors |
131 |
| 10/22/02 |
database |
N/A |
ALL |
Refines the method that posts the PLU history file to reduce the amount of space it uses in the database |
132 |
| 10/23/02 |
Reports |
N/A |
ALL |
Corrects a problem with the TLOG report not displaying the Server Number and the Transaction Number on the report |
133 |
| 10/24/02 |
Manager.exe |
1.01.0738 |
A420 |
Corrects a problem where the initialization fails for the A420 when the PLU or GLU files are not allocated. |
134 |
| 10/28/02 |
database |
N/A |
ALL |
Adds the ability to capture and send the Service Patch file |
135 |
| 10/29/02 |
Manager.exe |
1.01.0739 |
ALL |
Corrects a run time error when a terminal is added after a new store is created and the default store number is not used |
136 |
| 10/29/02 |
Manager.exe |
1.01.0739 |
ALL |
Corrects a problem where the text from the PLU group from any stores is always displayed from store 1 in the PLU editor |
137 |
| 10/29/02 |
Manager.exe |
1.01.0739 |
A420 |
Adds a beta version of the Virtual Keyboard for the A420 |
138 |
| 10/31/02 |
Skanlan |
2.1.2.11 |
ALL |
Corrects a timing problem where an error message is returned on some Windows 2000 computers when issuing the command to capture the complete RAM backup (50-00 command) |
139 |
| 11/05/02 |
database |
N/A |
ALL |
Changes the PLU History table to allows Key Text 2 - Key Text 6 to be null values |
140 |
| 11/04/02 |
SKAN_Talk.OCX |
4.1.2.5 |
A570 |
Adds the data conversion for the Customer file |
141 |
| 11/06/02 |
database |
N/A |
A570 |
Adds the Tlog and Customer Sales Report |
142 |
| 11/08/02 |
database |
N/A |
UP600, A570 |
Corrects a problem on the customer report when sorting for a specific customer it creates a blank page for all customers except for the customer selected rather than omitting them. |
143 |
| 11/08/02 |
database |
N/A |
UP600, A570 |
Changes the Customer Report to show the extended amount in the Amount column when the quantity for an item sold is greater than one |
144 |
| 11/08/02 |
Reports |
N/A |
UP600, A570 |
Corrects an error on the customer report when departments sales are entered, the name of the department appears in the media description column |
145 |
| 11/08/02 |
database |
N/A |
ALL |
Changes the Automatic Sales Data Purge function from 6 months to 12 months |
146 |
| 11/08/02 |
Manager.exe |
1.01.0740 |
ALL |
Adds a status check of the size of the database when exiting SKAN_Talk. If the database is approaching its maximum size, it will give a prompt to compress the database. |
147 |
| 11/11/02 |
database |
N/A |
ALL |
Changes the default setting for the polling log so that it only shows warnings and error messages in the log screen but records all messages to the log files in the Manager\log directory |
148 |
| 11/14/02 |
database |
N/A |
A450, A570, UP600 |
Unified the Slip Printer Validation Text into a common table for the A450,A570 and UP600 |
149 |
| 11/14/02 |
database |
N/A |
A770 |
Adds the ability to get and send the default keyboard Menu Level |
150 |
| 11/15/02 |
Manager.exe |
1.01.0742 |
A420 |
Adds the Virtual Keyboard for the A420 |
151 |
| 11/15/02 |
database |
N/A |
A420 |
Corrects the Subtotal, MDSE SBTL and the Cash2 keys from displaying the incorrect text on the virtual keyboard |
152 |
| 11/15/02 |
database |
N/A |
ALL |
Made internal changes to the structure of the database that unifies the food stamp and commission group data in the department and PLU tables for all model ECRs. These changes should be transparent to users |
154 |
| 11/20/02 |
Manager.exe |
1.01.0745 |
ALL |
Adds a new option that if selected allows the unattended polling to automatically clean up and retry polling for stores that had previously failed and were not re-polled using the fix failed polling option of SKAN_Talk . It will not attempt to re-poll stores that collected all the report data but did not finish the resetting of the totals. |
155 |
| 11/22/02 |
Manager.exe |
1.01.0747 |
ALL |
Enlarges the screen for the Fix Failed polling screen |
156 |
| 11/22/02 |
Manager.exe |
1.01.0747 |
UP600 |
Corrects a problem on the Sharp dealer packages when the same store number is reused to initialize different models of ECR and not all of the previous files are overwritten. SKAN_Talk now detects whether the combo meal file is correct for the current model and does not give an error when loading the virtual keyboard |
157 |
| 11/22/02 |
Manager.exe |
1.01.0747 |
ALL |
Adds color coding to the fix closed polling screen so that stores that completed show up green, stores that failed, but polling will be retried on the next polling session are yellow and stores that failed and will not be retried are red |
158 |
| 11/22/02 |
database |
N/A |
UP600 |
Changes the internal structure of the Capture Sales table in the database to more closely resemble the TLOG data. This change will be transparent to all users |
159 |
| 11/22/02 |
database |
N/A |
A450, A420 |
Corrected a problem in the hourly report where only the totals for the selected store would show up instead of all stores |
160 |
| 11/27/02 |
SKAN_Talk.OCX |
4.1.3.0 |
A570, UP600 |
Allows for the exporting of data for the Customer Preset file on the A570 and the exporting of data on the Customer Sales file on the UP600 |
161 |
| 11/27/02 |
database |
N/A |
UP600 |
Corrects a problem when a record is added to the Customer Preset file in SKAN_Talk and sent to the register but that the record is identified in PGM2 but gives an "Undefined Code" message when that customer number is used during a transaction |
162 |
| 12/02/02 |
database |
N/A |
A420, A470 |
Corrects the Flash Terminal report where it gives an error generating the report |
163 |
| 12/02/02 |
database |
N/A |
A570 |
Adds the posting of additional fields dealing with the Customer Sales to the TLOG history |
164 |
| 12/03/02 |
SKAN_Talk.OCX |
4.1.3.1 |
ALL |
Updates the mechanism to see if there are any failed pollings before polling begins for any given store and how to proceed if there is a failed polling |
165 |
| 12/05/02 |
database |
N/A |
A550 |
Added the data conversion and polling support for the A550 |
167 |
| 12/10/02 |
Manager.exe |
1.01.0768 |
ALL |
Adds a Test communications button in the Store Editor |
168 |
| 12/10/02 |
Manager.exe |
1.01.0768 |
ALL |
Adds the Tare Table editor |
169 |
| 12/11/02 |
Manager.exe |
1.01.0769 |
ALL |
Adds BETA support for the A550 |
170 |
| 12/11/02 |
database |
N/A |
UP600 |
Corrected an error when running the Flash Terminal and Flash Hourly report when polling by individual terminal over TCP/IP |
171 |
| 12/13/02 |
Manager.exe |
1.01.0777 |
A450, A470, A550, A570 |
Revises the way the Link PLU and Set PLU tables are created and edited. When a PLU is set to be a link or Set PLU type, it creates the Link or Set record and automatically opens the Link / Set PLU editor rather than having to create it manually |
172 |
